Stainless steel types 1.4301 and 1.4307 are also known as grades 304 and 304L respectively. Type 304 is the most versatile and widely used stainless steel. It is still sometimes referred to by its old name 18/8 which is derived from the nominal composition...

Stainless Steel 316 (UNS S31600) is the standard molybdenum-bearing grade, second in importance to 304 amongst the austenitic stainless steels. The molybdenum gives 316 better overall corrosion resistant properties than Grade 304, particularly higher...

Inconel 600 (UNS N06600) is a nickel-chromium alloy used for applications that need high temperature resistance and corrosion. This nickel alloy was developed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. They...

Inconel 625 (UNS N06625) is an oxidation and corrosion resistant alloy Yaang supplies in flanges, bar, pipe, tubes, gaskets, and pipe fittings. Inconel 625 is employed for its outstanding aqueous corrosion resistance as well as strength. The outstanding...

Alloy 20 (UNS N08020) is a nickel-iron-chromium austenitic alloy developed for maximum resistance to acid attack, particularly sulfuric acid. This super alloy has a high resistance to corrosion, crevice corrosion and pitting in chemicals containing phosphoric,...

Chemical Formula Fe, <0.08% C, 17-19% Cr, 9-12% Ni, <2% Mn, <1% Si, 0.3-0.7% Ti, <0.045% P, <0.03% S Background Grade 321 and 347 include the basic austenitic 18/8 steel (Grade 304) stabilised by Titanium (321) or Niobium (347) additions. These grades...

Stainless steel A286 is a heat and corrosion resistant austenitic iron-base material that may be age hardened to some high strength level. It is made for use at temperatures up to 704°C (1300°C ) where good corrosion resistance, excellent creep strength...

The thought of ERW (Electronic Resistance Welded) steel Pipes and Tubes was born in 1920 nevertheless, the true plan of action of galvanization happened 1962. ​ Making: ERW Pipe and Tube are produced from strips of hot-steel. The steel is firstly flattened...

In the last a long time, corrosive conditions inside the Oil and coal Industry have steadily grown in severity. The offshore oil industry continually pushes oil exploration to greater depths, which leads to higher pressure conditions and harsher environments....

Desalination Plants are recognized to be very severe environments due to the high chloride, warm conditionsi. Before, austenitic stainless steels within the ASTM 300 series somewhat the material of in desalination plants. In the event through which even...